How to decorate a wooden box. Decoupage boxes: technique, modern style and recommendations for beginners (105 photo ideas). DIY jewelry box made of papier-mâché

There are situations when there is a desire to please loved ones with an unusual gift. I want to find something interesting, some exclusive little thing. Sometimes you need to go around more than one store for this. And you can make a bright and unusual gift with your own hands. For example, decoupage a box and give it as a gift.

Decoupage often turns into a permanent hobby, and people who have decorated any item themselves at least once simply cannot stop. This technique is used to decorate not only caskets, but also bottles, jars, antique chests of drawers.

If you decide to try the decoupage technique for the first time and don’t know where to start, you can get ideas from the Internet. Having chosen the thing you like and having prepared all the necessary tools, you can get to work.

What is needed for decoupage

Before you start decorating the box, you should prepare all the equipment you need for work. Get in advance: napkins, sandpaper, decoupage glue, paints, a wax candle, adhesive tape and other raw materials for decoration, a screwdriver.

The list of required materials may vary depending on the chosen style. Be sure, before starting the decoupage process, you need to prepare the working surface of the wooden box.

Decoupage technique

After preparing all the necessary equipment, you can begin work on the box. Consider step by step instructions how to decoupage the jewelry box with your own hands. Wood is considered to be the most ideal raw material for decoupage. It is the easiest to process and decorate.

Execution steps

The first and main step is the preliminary preparation of the working area of ​​the box. Since we are talking about wood, the entire surface of the box must be thoroughly cleaned with sandpaper. The quality of the treated area affects the quality of decor application.

The second step is the removal of all elements from the metal. You can use a screwdriver to complete this task. After removing these parts, the working area must be completely covered with acrylic paints, the so-called toning must be performed.

The third step requires accuracy in execution. It is necessary to transfer the selected image to the treated area. In shops for creativity, a wide range of napkins for decoupage is presented.

In a set with them, there is usually an instruction for beginners. It correctly describes how to carefully separate the part with the image from the rest of the napkin.

The next step is to fix the transferred image on the working area. To do this, use specialized glue for decoupage. Before moving on, you need to wait for it to dry completely.

The final step will be varnishing the box. To improve it appearance, varnish is applied in several layers. After the varnish has completely dried, you can start decorating the box. We attach all the metal elements to where they were originally.

The decor of the box is influenced by the decoupage style, which was chosen at the very beginning. According to him, there are situations when you do not need to add decoration elements. Or vice versa, when decorating the box, they add different details and replace the accessories.

Styles in which decoupage is performed

If, when choosing a gift, the choice fell on making a decoupage box, then you need to figure out what varieties it is.

Depending on the technique of decoupage, there are several varieties of it:

Execution of the box in vintage style. This is a well-known technique for decorating a wooden box. Its essence lies in special aging. There are many master classes on making a box in this decoupage style. But the meaning of all of them comes down to one thing: the paint is applied in several layers and with excellent shades.

The darkest shades of the selected paint are used under the base, then we treat the working area with varnish and leave it to dry. When the varnish dries, covers the area with candle wax. This manipulation will slightly erase the varnish and help achieve the desired effect.

The next step is to cover the entire working area with paint of a lighter shade. We are waiting for complete drying and process the areas with wax with sandpaper. We clean everything down to a darker layer of paint. We thoroughly wipe the box from working dust and leave to dry completely.

To emphasize the antiquity of the box, it is possible to process the corners on the box with a sponge. You need to do this with a dark shade of paint. The image that is applied to the box can be picked up on the Internet or in a store.

Provence variety. It is characterized by the use of light paint. More often, this technique performs the transformation of rounded caskets.

A variety of shabby chic in terms of execution technique does not differ from vintage and provence. A distinctive feature is the use of light shades, floral themes. This style is used when decorating different surfaces, and not just boxes.

To create a more complete picture of distinctive features of all styles, you need to consider photos of decoupage boxes. There are many of them on the Internet.

Photo decoupage boxes

Currently, the decoupage of the box is gaining more and more fans, which is not surprising. After all decoupage allows you not only to express your creative abilities with your own hands, but also to get an interesting thing. There were even related books on sale. What is decoupage? This is a special technique with which you can transfer any image to the surface. In this article, we will consider the decoupage technique for the jewelry box.

Necessary tools for decoupage boxes

The technique of decoupage of the box involves the use of the following items:

• box blank (you can use a blank purchased at a specialized store);
• napkins for decoupage technique;
• sandpaper;
• PVA glue;
• decoupage glue;
• acrylic paints;
• sponge;
• brushes;
• screwdriver;
• adhesive tape or tape;
• various decorative elements;
• acrylic primer.

Decoupage technique

So, having collected the necessary tools, we proceed directly to creativity. Perhaps the most ideal material for decoupage is wood. At the same time, in this technique, you can process both the tea box and the plastic surface with your own hands. Whatever material you choose, in any case, the box must first be prepared. To do this, we process the surface of the box with sandpaper.

Then the workpiece can be primed with acrylic primer.

Metal elements are best removed with a screwdriver. The next step is toning the workpiece. To do this, paint over the box acrylic paint.

The next step is directly transferring the pattern to the surface of the workpiece. Such transfer pictures can be purchased at a specialized store. To do this, we separate with our own hands the top layer of the decoupage napkin, on which the pattern is applied. We tear out the elements of the picture with our hands. Having placed the napkin on the desired field of the box, we apply decoupage glue.

Leave until completely dry. From above we apply varnish in several layers. The next step is to decorate the box with your own hands.

First, we return all the elements removed at the first stage of work. The decoration of the box depends solely on the style chosen for decoupage. In addition, the product can be ennobled using the craquelure technique.

To better understand the sequence of actions, watch the video at the end of the article.

Ideas for decoupage boxes

Decoupage of the box is a creative activity, so even if you are guided by clear instructions, you will get an original little thing. Let's consider the main ideas that are used when decoupage boxes. Among the most popular:

1. vintage;

Despite the fact that shop windows offer a large number of jewelry boxes made of various materials, the desire to make it with your own hands does not disappear. After all, this is not only a tribute to one's talent and skill, but also the desire to have an original thing that no one else can find. In addition, it is of great importance that a hand-made box will have exactly the size that is so necessary to place all the jewelry.

The box is made by hand in two stages:

1) Creation of the box itself from improvised materials;

The material for it can be scotch rings, wooden blocks or baguette trimmings, old newspapers, shoe boxes, and other improvised materials.

Tape reel box

Tape reel box

If a small box is enough for jewelry, then you can make it from a paper tape reel. The size finished product will correspond to its diameter and height.

For work you will need:
reel freed from adhesive tape; thick cardboard; pencil; scissors; glue (preferably PVA).

For the bottom and lid of the future box, you need to make cardboard blanks. It is enough to attach the reel to a sheet of cardboard and circle with a pencil. We circle the resulting circles with another circle, the diameter of which is 3-4 centimeters larger than the previous one. These are the future rays with which the circles will be glued to the bobbin. Don't make them too wide. The narrower they are, the more accurately the bottom will stick. The end result looks like this:

Before gluing the bottom to the bobbin, it is necessary to draw along the fold line with a non-sharp object, you can use the edge of tweezers or a metal ruler. This will help to gently bend them. To hide the petals on the side, you need to stick a cardboard tape over them, corresponding in length and width to the side of the reel.

For the lid, you will need to cut a strip, slightly longer than the volume of the reel and half its height wide. In order for the lid to fit well, not to be too large, you need to wrap the future box with a strip and glue its edges. When the side of the lid is dry, you need to glue the top to it in the same way as was done with the reel.

To strengthen the rigidity of the bottom and the lid, you can glue one more layer of cardboard inside, cut along the inner diameter of the reel. The finished box is decorated with your own hands using the decoupage technique, it can be painted with acrylic paints and varnished or glued over the entire surface of a self-adhesive film with a pattern that imitates natural material: wood, stone.

DIY wooden jewelry box

The manufacture of such a box is more laborious than in the previous version, but it will also serve much longer than paper. For work you will need:

pencil, ruler;
a long plank 10 millimeters thick, 10 centimeters wide, made of soft wood: pine, alder, linden; a plate for the bottom and lid, its width is equal to the width of the finished product; hand saw with fine teeth or electric jigsaw; knife; sandpaper; PVA glue (it is better to take construction) or carpentry "Moment".

Having decided on the size of the box, you need to cut out two blanks from the plank, equal to its length and width. At the end of each, it is necessary to make a 45-degree bevel with a knife so that the walls fit nicely. The depth of the bevel is equal to the width of the plank.

Before gluing the side parts, you need to make sure that the bevels fit snugly, without gaps. Otherwise, they must be adjusted with coarse sandpaper. The sides are glued together gradually. After each subsequent gluing, it is necessary to check the internal angle between them. It must be equal to 90. Otherwise, the result may be any shape, but not an even rectangle.

There are two bottom options:

if the finished product will be pasted over with paper or cloth, then the blank for the bottom is taken equal to the size of the box and glued so that its side parts are visible;

Wooden box covered with paper

if a jewelry box with your own hands is covered only with varnish or paint, then it will look more beautiful when the bottom is hidden inside it. For this, a blank is taken, in length and width smaller than the size of the box by two thicknesses of the plank. For example: with a box size of 10x10 cm and a wall thickness of 1 cm, the bottom should be taken 8x8 cm.

Lacquered wooden box

The manufacture of the cover can also be in two versions:

cut the workpiece and install it on the hinges. Best Option lid fastenings - a piece of piano loop, the length of which is a couple of centimeters shorter than the length of the box. All ends of the boards visible on the finished product must be carefully processed with sandpaper;

glue the lid to the box and, after drying, carefully cut it off with an electric jigsaw, retreating down the body by one and a half to two centimeters.

A wooden jewelry box is decorated with all known methods: varnishing, painting, decoupage, pasting with oracal, fabric, leather.

Do-it-yourself box from a baguette

Luxurious baguette box

Boxes made of a baguette, a material for picture frames, look chic and rich. It is made of wood or plastic. Plastic is soft, can be cut and processed no worse than wood. You can buy a baguette in art salons, having previously determined how long the blank is needed. The principle of manufacturing such caskets is identical to working with wooden blanks.

DIY jewelry box made of papier-mâché

Papier-mâché box

What is papier-mâché, how to work with it, we know from the school bench. The advantage of this material lies in the variety of forms of the finished product. It is enough just to find the original blank of the required shape to create an original box.

For work you will need:
newspapers or thin office paper; vaseline or any cream; scissors, brushes; PVA glue or wallpaper.

Do-it-yourself papier-mâché box

The base must be covered with petroleum jelly or cream, so that later you can easily remove the papier-mâché. The first layer of thinly torn paper must be wetted and covered with the entire surface of the base. Paper for the second and each subsequent layer is carefully smeared with glue. You need to make sure that there are no missed sections. It is convenient to alternate, for example, layers of newspaper and white paper. The better the paper is impregnated with glue, the stronger the papier-mâché will turn out. The number of layers is optional. After complete drying, the blank of the box must be removed from the mold and prepared for decoration. If it is a painting with paints, then it must be coated with an acrylic primer. In addition to painting, a do-it-yourself box can be decorated with beads, ribbons, buttons, figurines made of plastic or salt dough.

Chinese papier-mâché box

If the basis for papier-mâché was a round object, the lid was created together with the box, then it is necessary to remove it carefully, having previously drawn a cut line with a pencil. If the layout was created without a lid, then after removing it from the base, you need to align the edges with scissors. The lid is attached to the box before being treated with a primer. Holes for the connecting cord can be made with a paper punch.

Decorated box with their own hands is opened with varnish. It is better to use an acrylic-based varnish purchased at an art salon. Artists cover their canvases with this varnish to avoid contamination and fading of paint.

DIY box from a bamboo napkin

For work you will need:
bamboo napkin; thread with a needle, PVA glue; scissors, cardboard, finishing cloth; magnetic fastener.

Cut out the sides of the future box of arbitrary shape from cardboard.

Sew or glue decorative fabric to them on both sides, leaving a small allowance for the seams. A bamboo napkin can also be decorated with a fabric on the side that will be inside the box. The sides can be sewn or glued to the napkin, leaving some part free.

The clasp can be made in the form of an eyelet and a button, or you can purchase a magnetic clasp at an accessories store.

So that the jewelry box does not get dirty and for a long time had a neat appearance, it is better to open it with acrylic varnish.

Several ways to decorate boxes

Below are photos of jewelry boxes made using different decoration techniques.

For lovers of rigor and minimalism in everything, it is enough to make the box monophonic, covering it with paint and protective varnish.

Decoupage decoration technique has recently become fashionable, but has already become very popular. A large assortment of illustrations for decoupage, up to images of paintings by great artists, is produced on special napkins. You can use regular napkins, magazine illustrations, and even wrapping paper. You will also need sharp scissors, a few brushes, PVA glue, paints, acrylic varnish. Before starting work, the surface must be primed with acrylic paint or glue. Carefully smooth each element of the image with a brush dipped in glue until it is completely glued to the surface and air bubbles come out from under it.

Proportions for salt dough: 1 part flour (the cheapest without additives) to 3 parts salt, mix and add water until the consistency of soft plasticine. Decor elements from dough, unlike putty, are first made and then glued to the surface.
After drying, the decor must be covered with two layers of white acrylic paint. Painting is also best done with acrylic. After drying, apply one or two coats of varnish.

Below are photos of jewelry boxes decorated with beads, seashells, fabric and ribbons:

Jewelry box decorated with beads

A handmade box will not only decorate your interior, giving it a personality, but can also be a great gift for any celebration. And the material for its manufacture will be any household item or donated by nature. The main thing is a little imagination and perseverance.

Every woman at home has a box, a box, a jar in which jewelry, jewelry, cosmetics, and so on are stored. The most common items for storing small items are caskets. They are made of wood, cardboard, glass, metal. Now you can buy a lot in the store, but there are many people who love to create, decorate objects with their own hands. If you decide to decorate your box, make it original and unique, our master class will help you. The decor technique is the simplest, most accessible and understandable. You do not need to have a special skill to decorate the box with your own hands and add charm to it.

If a piece of vinyl wallpaper remains after the repair, you can use it to decorate a wooden or cardboard box. Our master class will tell you how to decorate a simple thing with your own hands, using textured wallpaper, and give the surface a metallic effect. Let's say you have such a roll of wallpaper left. Wallpaper can be of any color, our task is to paint the paper to match the color of the metal.

For work you will need:

1. A piece of wallpaper or textured paper.
2. Construction glue PVA.
3. Paper towels.
4. Acrylic paints: black, copper, red, silver, green, dark gold.
5. Coating varnish.

To decorate the box with your own hands, you need to take a roll of wallpaper or textured paper, attach it to the box and cut off a piece with an allowance for the sides.

You can only decorate the lid of the box without touching the side walls. You can decorate both the lid and the sides. Who likes it better. To glue the lid, smear the back of the paper with a brush or sponge. We take PVA glue and dilute it a little with water. You need to spread so thickly that the paper is well saturated with glue and swells. We leave the paper aside for a while until it swells completely. Then glue it on the surface of the box. We press it well with a sponge or with our own hands to the surface. Make sure there are no wrinkles or bubbles.

Next, let the glue dry and only then paint the box and give it the look of metal, aged by time. In order to apply paint to the surface, disposable paper towels soaked in water are used. We need the paint to lie unevenly and in irregular islands. First, cover the surface of the box with black acrylic paint. We have it in a spray can, but it can also be in a bank.

Dry and then cover with red acrylic paint.

Add silver paint after the previous one has dried.

We muffle red silver with bronze color.

At the end of the master class, we make a varnish coating on the resulting product. Varnish can be any: matte or glossy, aerosol or plain. You can also make a vase decor, you will get a kit.

In this master class, we combined several techniques for decorating a box with our own hands. Let's try to mix styles, textures and techniques. The main theme of this master class is the imitation of fabric using painting. Since not everyone can draw well, we decided to use a stencil here.

The stencil drawing is attached, you can choose any one you like.

The master class is simple, even a beginner can handle it.

For work you will need:

1. Casket or box.
2. acrylic primer.
3. Acrylic paints.
4. Tassels.
5. Stencil.
6. Masking tape.
7. Sandpaper.
8. Everything that can be useful for decoration: cord, ribbons, lace, braid, and so on.

If the box or blank is made of wood, you may need to sand it with sandpaper and varnish it. So we will protect the workpiece from swelling.

We are waiting for it to dry and cover with acrylic primer.

Dry and sand. Seal the top and bottom corners with masking tape.

We paint all sides of the box with any light acrylic paint. Thus, we make the bottom layer under the imitation of fabric.

We paint with a brush in a horizontal direction, apply the paint evenly and evenly. Next, let the workpiece dry, sand it with sandpaper and varnish it. We mix our light paint with the same beige tone darker.

The paint should not be too thick, so be sure to soak the brush in water and wring it out. We apply it on the side part with horizontal strokes.

Then we take a sponge or brush and draw along the surface in a horizontal direction.

That is, we need to make an imitation of the fabric. This will be one direction of our "fabric". Here is what should happen after processing with a sponge or brush:

We needed a layer of varnish so that the paint did not soak into the surface of the product. If not for the varnish, then we would not have received such a textured surface. We also act with all the side surfaces of the box: paint and erase the paint with a sponge or brush. It will be great if you apply varnish on top. We are waiting for the product to dry, we collect the same paint on a wet brush and paint the side parts, but already vertically. We erase the paint with a sponge vertically. As a result, we should get a "fabric".

We dry and lightly process the side parts of the product with sandpaper. Choosing a stencil for our pattern. Let's say this is a drawing with a rose.

We seal with tape the places that are not needed for decoration. We place the stencil on the side of the product.

Choose colors for the pattern. In this master class, it is yellow, burgundy, light green and dark green. We collect paint on a brush or sponge and apply it to the stencil. There should not be a lot of paint so that it does not flow under the template. Your brush should be semi-dry. Do not rush, if the first time it turned out not bright, you can walk with a brush again. We remove the stencil, wait for the paint to dry. Flip the stencil over to the other side. Flowers should be arranged randomly. Coloring the stencil.

This is what the side looks like. There should be no empty spaces, instead we draw leaves on the main background. We fill the empty space with small leaves.

Next, sand the sides after the surface dries. To complete the work, you can cover the sides of the product with several layers of varnish. It's time for the lid. Glue strips of masking tape to the sides of the lid. We paint the cover in the same order as the sides. First, a light color, under the "fabric", we varnish. Then the “fabric” itself: paint with a brush horizontally, then vertically.

We dry the lid, lay out the stencil on it in different directions. Apply yellow and light green paint. All empty spaces are filled with small sheets. We apply the stencil again, paint over the roses with a burgundy color, the leaves with dark green. Sand with a brush horizontally and vertically after drying. We admire our work and apply varnish in 2-3 layers.

We decorate the bottom of the box and the sides at our discretion. In this master class, the sides of the lid are painted yellow, a cord is glued with a glue gun. Below is a velvet ribbon glued with Moment glue. Glued wooden legs. It will be beautiful if you attach a strip of lace or gold braid, cord, and so on.

The decor of the box is a boundless scope for your imagination. All this beauty can be done by hand. Not all boxes have an elegant design and are suitable for decorating the interior. But if desired, this can be easily corrected. Anyone who has a little free time, patience and inspiration can make a thing exclusive.

You can decorate with anything: buttons, paper flowers, lace, polymer clay, beads, glass, coins, shells, and so on. Perhaps you have jewelry that you don’t wear, but you don’t raise your hand to throw it away: it will also come in handy for decoration. The photo shows a variety of decor items for storage. We hope that these ideas and master classes will be useful to you in your work.

Today, decoupage of the jewelry box is very popular among connoisseurs of beauty. And this is not surprising. With the help of such art, you can express your creative abilities, and as a result, acquire a valuable and exclusive thing. What is decoupage? This is a unique technique that allows you to draw a picture on different surface . As a working material, not only the box can be used, but also a book and other items. Today we will look at how to convert an old jewelry box.

Necessary tools and materials (MK)

To apply an image to a product, you must have the following materials:

• special napkins for decoupage;
• sandpaper;
• decoupage glue;
• wax candle;
• adhesive tape and various elements for decoration;
• screwdriver.

The exact list of tools and materials depends on what technique will be used to apply the drawing.. It should be borne in mind that before decorating, it is necessary to prepare the surface. Below we propose to consider a detailed master class for decorating a box with your own hands in the decoupage style.

Decoupage technique

Having everything necessary materials and tools, you can proceed directly to creative activity. It is worth noting that wood is considered the best option for decoupage.. If desired, a book or plastic product can be used.

Stages of decoupage execution of a wooden box:

1. First you need to prepare the surface of the box. If we are talking about things made of wood, then the base should be carefully processed with sandpaper. High-quality surface preparation will be the key to successful decoration of the box. This is especially true for old products.

2. If the object has metal decorative elements, then it is better to remove them for a while. You can solve this issue with a screwdriver or other improvised tools. When the surface is prepared, you can begin to tint it. Here we are talking about painting it completely with acrylic paints.

3. At this stage, the selected pattern is transferred to the surface. Ready-made drawings can be purchased in special stores. The part with the image on it is carefully separated from the napkin.

4. Elements of the pattern are carefully applied to the prepared surface. Selected places on the product are processed with decoupage glue. After that, you will need to wait until the glue is completely dry.

5. At this stage, the thing is varnished several times. When the surface is completely dry, you can proceed to the direct decoration. To begin with, the old decorative elements are fixed in place. At the same time, they take into account in what style the product itself will be designed. In some cases rational decision there will be a change or complete removal of certain decorative elements.

It is necessary to take into account in what style the product itself will be designed. Decoupage of a wooden box provides for its decoration, up to the change of all decorative elements and accessories.

On video: Decoupage boxes with antique scuffs

Decoupage in different styles

Decoupage for beginners is a creative activity. Even the use of instructions does not deprive the product of originality. After such a technique, the box or book will become original in its own way. Before proceeding with the conversion of the product, it is worth considering all the available options.

Registration can be carried out in different styles:

• vintage;
• provence;
• shabby chic.

The most common option is decoupage in the style vintage . With the help of certain tricks, the box can be somewhat aged. To achieve maximum effect, experts recommend using the craquelure technique.. The effect of aging is created using paint, which is applied directly to the prepared surface. To begin with, dark colors are used, and lighter tones are applied on top of them.

Decoupage boxes in vintage style

Stages of decoupage in vintage style:

1. The first coat can be applied with brown paint, then wait for the surface to dry.

2. A second coat of paint is applied, only a lighter shade. The best option is white, light gray and beige.

3. When the paint dries, the places are lightly rubbed with sandpaper. Processing is carried out until the bottom layer of paint comes out.

3. At the final stage, the product is decorated. The best option here would be retro pictures, roses and other patterns. For decoration, the craquelure technique is also often used. This decoupage jewelry box will be an original decoration for any room interior.

No less popular is decoupage in style. provence. Work is performed in the same sequence. Of course, there are some peculiarities here. For decoration use drawings of flowers or rustic motifs. It is rational to use paint of bed shades. The aging effect is also relevant here. Using the craquelure technique, you can create the appearance of cracking in the pattern.

Decoupage boxes in Provence style

Provence style is ideal for transforming a round box.

Jewelry box in style shabby chic decorated in almost the same way as in previous techniques. characteristic features are bed tones, old pictures, images of flowers, twigs and other "delicate" details. Shabby chic is used to decorate various items, regardless of their shape and size. This is especially true for products made in the form of a book.

Decoupage in shabby chic technique and using printouts (2 videos)

Interesting ideas for decoupage boxes (41 photos)