1c courses for beginners online. Video training for programmers

In our new article we will talk about where a beginner should start mastering 1C 8.3 programs.

The vast majority of enterprises use programs based on 1C 8.3 to record business processes and do accounting. This is convenient and practical, but it is difficult for an untrained user to immediately master all the capabilities of the software, even taking into account the efforts of the developers to simplify the interface. And, first of all, this is due to the user’s lack of subject knowledge. After all, it’s not easy to understand an accounting program if you don’t know at least the basics of accounting itself. Isn't it? Various educational materials, as well as lessons on 1C accounting, will come to help you study.

What does a “teapot” have to study?

Before plunging headlong into mastering and developing practical skills, a beginner needs to decide where to start.

Books

Before mastering the program interface and becoming familiar with the functionality, we recommend reading specialized educational literature. , in particular, a large number have been published, so the “teapot” will have plenty to choose from. The textbook 1C: Accounting 8. First steps will be especially useful for a beginner.

Educational versions of programs

To start working with the program, you do not need to buy the full version of 1C 8.3. It will be enough. This 1C program for dummies will allow you to experiment with tools and capabilities, as well as gain the necessary practical experience.

Courses 1C 8.3

If you have a great desire, but lack discipline, you can use 1C 8.3, where teachers will monitor the effectiveness of training.

Free video lessons

When working with various tools or functions, beginners are bound to experience confusion: what sequence of actions is necessary, what buttons to press, where to find this or that tool, and so on. The answers to these and other questions are not always contained in books, and the best assistant in mastering the program on your own will be lessons on.

The short videos contain all the information a beginner needs on working with configurations. Everyone has the opportunity to access free lessons on.

Internal programming language 1C 8.3 for beginner programmers: installation of 1C and your first program in 1C language

If you have not read the introduction to the lessons, please read it: .

Installation of the educational version of 1C

To learn programming we need 1C 8.3 (not lower 8.3.13.1644 ) .

If you have 1C version 8.3 installed, use it. If not, download and install the educational version, which 1C produces specifically for educational purposes.

Task No. 1: download and install the educational version of 1C 8.3.

After completing Task No. 1, the following shortcut should appear on your desktop:

Congratulations! The 1C platform is installed and very soon you will be able to write your first program.

First program

This has already become a tradition for programmers - when learning a new language, the first thing they write in it is a program that prints the phrase “Hello, World!” on the screen.

We will not be an exception. But, being Russian programmers, we will force the computer to display the phrase “Hello, World!” on the screen.

Task No. 2: write a program in 1C 8.3 language that, when launched, displays the phrase “Hello, World!” on the screen.

Instructions to follow:

1. Launch the "1C:Enterprise" shortcut on your desktop.

2. A list of 1C databases has opened in front of you. As you can see, it is empty. Let's create a training base in which we will program. Click " Add".

3. Select " Creation of a new information base" and click the " button Next".

4. Select " Creating an infobase without configuration..." and click the " button Next".

5. Specify " Educational" and click the " button Next".

6. Specify any empty folder as the base directory (in this case it is the “Training” folder in my documents). Click the "Next" button.

7. Specify the authentication option " Select automatically", startup mode" Fat client". Do not specify anything as the 1C:Enterprise version, click the "Finish" button.

8. As you can see, the first database that we just created ourselves has finally appeared on the list! Let's start writing code. Click " Configurator".

9. In the window that opens, select from the menu " Configuration"->"Open configuration".

10. In the panel that opens on the left, right-click on the word " Configuration" and select from the list " Open a managed application module".

11. A window with the editor has opened. You can write text here! We will work with him in the future.

12. Now, without thinking, just copy the following text into this window:

Report("Hello, World!");

13. Great! The code for our first program is ready. Let's run it. Through the menu " Debugging"->"Start debugging" (or key F5).

14. We will answer the question in the affirmative.

15. After a second or two, 1C will start and the message “Hello, World!” will appear in the window below. We got what we wanted from the computer. Congratulations on your first program!

Did something go wrong? Still have questions? Email them to me [email protected] and I will answer you today. Your teacher: Vladimir Milkin.

Teacher's message

The difficulty level of the lessons goes from bottom to top. Therefore, try to study consistently, without skipping anything or putting it off for later.

Be sure to complete all tests and homework, try to improve your results. Check reference solutions only after completing the tasks yourself.

Understand the 1C program yourself

It happens that the program was installed today, but it was necessary to work in it “yesterday”. In such a situation, you can start working right away by accessing the help built into the program and the included user manual. In addition, 1C company produces additional methodological literature. You can also ask questions to our specialists Hotline.

do not waste time on training;

it is possible that in the end the process of mastering the program will take longer than after attending the course;
lack of a “complete picture”: work methodology, document relationships;
errors are inevitable when working with the program; time saved on training can be spent on correcting errors;
possible ineffective use of standard system tools;

This method of mastering the program is far from the most effective. We can offer it only to experienced users of previous versions of 1C programs.

But even in this case, we recommend that you first complete a review 1C training course in our Open Training Center. In terms of time, it takes only two partial days, and at the same time gives an idea of the correct working methods and basic accounting operations. We provide this course for free with the purchase of 1C:Enterprise 8.

Quite often, at the end of the classes, students note that before the training they performed the same operations, but did it in a different, more complex way. But they did not know about other useful capabilities of the system, or did not use them.

Take an overview training course 1C

If you do not want to spend a lot of time on training, but want to learn the correct methodology for working in the program, then a review training course will be very useful to you.

1C overview training courses have been developed leading teachers our Open Training Center for basic configurations (1C: Accounting 8, 1C: Trade Management 8 , 1C: Salary and Personnel Management 8) and certified by 1C. Our course "1C: Accounting 8. First steps" was chosen by 1C as a universal course for all Certified Training Centers. This confirms the quality of his methodology.

Review courses are provided as free bonus to the 1C program purchased from us. It can also be completed separately for a fee. Course participants receive . Duration of training – 2 lessons of 5 academic hours every other day. Training takes place in the center of St. Petersburg.

get an idea of the correct methodology for working in the program;
get acquainted with the basic operations and perform them once or twice;
spend very little time on training;

The course is still a review course and requires consolidation of acquired skills in the process of independent work;
errors when working with the program are possible, but they will not be critical, and there will be fewer of them than when studying on your own.

We can recommend this method of mastering the 1C program to experienced users of previous versions (primarily version 7.7). The course will allow you to learn the benefits of the updated version, increase your work efficiency and help you avoid mistakes.

Also, this course is suitable for inexperienced users who will maintain simple accounting in an organization (for example, without complex VAT accounting, without commission).

Complete the full 1C training course

If you prefer study the program in detail with a specialist teacher and also get practical skills to perform all operations, then we recommend that you complete the full training course.

Complete training courses were developed by 1C. Our teachers are certified by 1C to teach the program of these courses.

Course participants receive teaching materials and certificate . The duration of training is 5-6 lessons (depending on the program configuration) of 4-5 academic hours every other day. Training takes place in the center of St. Petersburg.

When purchasing the 1C program from us, there is a 30% discount on this course if it replaces the free review course.

master the correct methodology for working in the program;
become familiar with all operations in detail and perform them once or twice;
develop work skills: complete a task to consolidate the material covered, which is then checked by the teacher;
analyze the most difficult moments in order to eliminate common errors during work;
learn about the benefits of the program and its useful functionality;
You receive teaching materials and a certificate.

it is necessary to allocate time for training.

We can recommend this method of mastering the 1C program to users who do not have experience in the program. And also to all those who do not want to spend time and effort on independent study and prefer to learn from others, rather than from their own mistakes.

This course is also suitable for organizations with complex accounting that requires the use of all program functions.

The activities of the SoftBalance company are certified according to the standard of quality management systems ISO 9001:2015 in the field of providing comprehensive services for the automation of accounting and office work based on 1C software products: assistance in choosing software, sales of software products, delivery, installation, configuration, maintenance, user training.

Today, the 1C:Enterprise program is the most popular platform for the work of accountants, financiers, analysts and economists. It is so popular in our country that it has almost completely replaced all known analogues, and the requirement to be able to work in this program is basic for economic specialists. In such conditions, in order to find a good job, it is worth enrolling in 1c training courses as soon as possible and keeping up with the times with the knowledge acquired.

The 1C platform is very accessible and understandable, so learning it will not be too difficult. The main thing is to have a general understanding of how computer programs work, know the basics of accounting and financial reporting, and find good courses. Please note that they focus more on solving standard problems rather than on theory. To improve your learning efficiency, use these tips:

Find specialized resources online. There you will learn a lot of interesting information about the operation of the 1C program and changes in the accounting system.
Ask your course instructor if he can provide videos or lecture notes to reinforce the material. You will also probably be interested and useful in video tutorials on 1C, which can be easily found on the Internet.
Be sure to complete all tasks offered for independent work and consolidation of acquired knowledge. Remember that “repetition is the mother of learning,” so return to the material you covered from time to time so as not to forget anything.
Move from theory to practice as quickly as possible. Install the program on your home computer and try to carry out basic accounting operations yourself.

Having learned 1C:Enterprise, you will easily master other similar software products for accountants, since they are all developed on a single platform. It also makes sense to enroll in 1C programming courses, because due to the enormous popularity of this program among entrepreneurs, the demand for competent specialists who know how to customize a system to the requirements of a specific enterprise, be it a car plant or a service station, is increasing.

To start self-learning programming, you need to download the program - in 1C terminology, a “platform”.

Quick Jump

Where to download from

Since 2013, downloading the 1C 8.2/8.3 platform is not easy, but very simple and, most importantly, absolutely free. The 1C company has opened access for downloading via the link, and this product can also be purchased for 600 rubles (with printed literature included, prices may change, but only slightly) Fill out your full name and email, after 5 seconds a letter appears with a download link and 1.78 Gb are already being drawn to disk while you are reading further (version 1C: Enterprise 8.3 Educational version + mobile platform, other assemblies probably take up less space).

As a result you get:

A version of the platform with limitations, many of which are very important (it’s even surprising that they were cut off), but almost 100% of the functionality is available and is enough for learning or at least a glance. (8.3.5.1248 as of 01/29/2015)
Configuration “1C: Enterprise Accounting (training)”. Version 3.0.30 (as of 01/29/2015)
Configuration “1C: Management of a small company”. Version 1.5.2 (as of 01/29/2015)
Configuration “1C: Managing a small company for mobile work.” Version 1.1.5.1 (as of 01/29/2015)
Demo configurations for the book “Practical Developer's Guide)
Universal processing suitable for all 1C configurations (such as “Query Console”, “Report Console” and many others)
E-books and manuals

Installation procedure

Installation composition

Composition of the documentation

Everything is installed without problems, but when installing the platform, it is better to select the installation language “Russian”, since there was a case where the English localization was installed and you cannot change it with a simple action. No drivers or protection are installed. .

Adding configuration

New or existing configuration:

Adding an existing configuration

Select the created database and enter the “Enterprise” or development mode ““.

In general, your options are:

refuse to study at all (if you find it difficult)
enroll, this may be justified, taking into account the fact that full training is not possible, because the volume is excessively large, and the courses will give you the desired vector.
plan training later (for example, look for other online literature that can also be used for training on this platform)
choose other areas of the 1C programmer profession (consulting on accounting in programs, administration/installations, updates, this kit contains materials on this topic, but less)

Then, you definitely need an “internship”:

Completing tasks on freelance sites (for yourself or for a customer)
Get a job as a 1C programmer assistant
Go to work in "franchise" (start with the distribution of ITS disks or hardware maintenance, then you will probably advance through 1C)
Get a job as a part-time programmer
Find a friend who will delegate 1C tasks to you

Even if you become an excellent 1C specialist, you always need to maintain your qualifications; working as a programmer means constantly learning new things. Configurations, platforms, legislation change regularly, for most jobs in the profession it is necessary to be in the “trend” of 1C development. pros and cons of online learning